Account
Checking…
Knight Division TacticalDoes KDT provide air monitoring and gas detection?
Air Monitoring, Gas Detection & Smoke Monitoring
Yes.
KDT provides air monitoring and gas detection for hazmat releases and oil spills, including multi-gas meters for LEL, oxygen, CO and H2S, PIDs for VOCs, and perimeter and community monitoring, with technicians who run the instruments and report readings to command. On wildfires, we support the smoke monitoring an Air Resource Advisor runs.
Typical configuration
- Multi-gas meter
- LEL, O2, CO and H2S standard; extra sensors on request
- PID
- VOCs from ppb to ppm range, typically with a 10.6 eV lamp
- Compound-specific
- Colorimetric tubes or sensors for benzene and other targets
- Particulate
- PM2.5 / PM10 monitors for dust and particulates at hazmat and spill sites
- Wildfire smoke
- KDT supports the Air Resource Advisor (THSP-ARA) and NFES E-Sampler smoke monitor kits as ordered
- Area monitoring
- Fixed and wireless real-time monitors with data logging
- Common alarm points
- O2 below 19.5% or above 23.5%; LEL at 10% (typical)
On a hazmat release or oil spill, air monitoring decides almost everything: where the zones go, what PPE people wear, whether work can continue and whether nearby residents are at risk. A four-gas meter reads the lower explosive limit (LEL), oxygen, carbon monoxide and hydrogen sulfide. A photoionization detector (PID) picks up volatile organic compounds at low concentrations, which is how crews track fresh crude and fuel vapors. Colorimetric tubes and compound-specific sensors confirm things like benzene.
KDT brings the instruments and the technicians to run them. We bump test and calibrate every shift, take readings in the hot zone with entry teams, set up fixed monitors at the perimeter and in nearby communities, and log the data so the Safety Officer and Unified Command have a record. When readings cross an action level, we call it right away.
On wildfires, KDT supports the incident's smoke monitoring as the incident orders it, working with the Air Resource Advisor (ARA, ordered as THSP-ARA through the GACC from the Interagency Wildland Fire Air Quality Response Program) who tracks smoke impacts on the public and on fire personnel, and with the NFES E-Sampler smoke monitor kits (NFES 005840) the incident requests through IROC.
Available as
- Personal multi-gas meters for crews
- PIDs for VOC screening
- Compound-specific monitoring (benzene, H2S, others)
- Wireless real-time perimeter monitoring
- Community air monitoring
- Support to an Air Resource Advisor's wildfire smoke monitoring
What's included
- Instruments, calibration gas and bump test stations
- Air monitoring technicians every shift
- Hot-zone, work-area and perimeter readings
- Data logs and daily summaries for safety and command
- Immediate notification when action levels are hit
Where it's used
- Setting hot, warm and cold zones
- Selecting and downgrading PPE levels
- Entry team monitoring in the hot zone
- Perimeter and community protection
- Supporting wildfire smoke monitoring under an Air Resource Advisor
Questions, answered.
Does KDT provide air monitoring and gas detection?
Yes. We supply multi-gas meters, PIDs, compound-specific and particulate monitors, and the technicians who run them, calibrate them and report the readings to command.
What does a four-gas meter measure?
The lower explosive limit (LEL) for flammable gases, oxygen, carbon monoxide and hydrogen sulfide. It's the standard first instrument on any hazmat or confined-space job.
Why use a PID on an oil spill?
Fresh crude and fuels give off volatile organic compounds, including benzene. A PID detects VOCs at low levels so crews know when to step up PPE or pull back.
How is wildfire smoke monitored?
The incident's Air Resource Advisor (ARA, ordered as THSP-ARA through the GACC) leads it, using smoke monitor kits such as the NFES E-Sampler kit ordered through IROC. KDT supports that monitoring with instruments and technicians as the incident orders it.
Can you monitor the air in nearby neighborhoods?
Yes. We set up fixed and roving community monitoring around the incident and provide the data to the Unified Command and public information staff.
Need it on your incident? Say the word.
Add it to your request with anything else you need, then send it all at once. We'll come back with what we can put where, and when.